13609623361
13609623361
产品展示
首页-产品展示-UL3300机器人检测设备 > 机器人障碍物类型
机器人障碍物类型
产品型号
更新时间
2026-06-25厂商性质
浏览次数
7产品中心
PRODUCT CATEGORY相关产品
RELATED PRODUCTS详细介绍
7.2.5 Obstacle test
The robot shall be operated per the manufacturer's instructions with the identified obstacles in the path of the robot and robot subassembly (e.g. , manipulator and/or end-effector) in motion under the following conditions. The robot shall start at a distance that allows the robot to reach its maximum speed before encountering the obstacle. The robot shall either stop prior to impacting the obstacle, avoid the obstacle or impact the obstacle with a force not exceeding the specified force in 7.2.2, General testing requirements. These tests shall be repeated for each robot subassembly that moves independently from the mobile robot.
a) Adult torso
– Cylinder of 200 mm diameter x 600 mm length;
– Placed horizontally; and
– Material with reflectance between 5 % – 1 0 % using black felt or coarse fabric.
NOTE 1 Source ISO 1 8646-2
b) Adult lower leg
– Cylinder of 70 mm diameter x 400 mm height;
– Placed vertically; and
– Material with reflectance between 5 % – 1 0 % using black felt or coarse fabric.
NOTE 2 Source ISO 1 8646-2
c) Child's body
– Toddler dummy (1 4.5 kg) with mass distribution specified in Table 2 and dimensions specified in Figure 1 . The dummy shall be placed in both standing and sitting positions;
– Material with reflectance between 5 % – 1 0 % using black felt or coarse fabric; and
– Infant dummy (9.4 kg) with mass distribution specified in Table 3 and dimensions specified in Figure 2. The dummy shall be placed in both crawling and laying flat positions.
d) Wall
– Plate resembling wall segment; both wood (e.g. pine) plate and uncolored acrylic plate with transmissivity of more than 95 %; and
– 1 .5 m height, 1 m width.
e) Table
– Plate with four legs resembling a table; both wood (e.g. pine) and metal (e.g. steel) legs;
– Height: 0.7 m – 0.8 m;
– Width: 1 .5 m – 2.0 m;
– Depth: 0.5 m – 0.8 m;
– Thickness of legs: 0.03 m – 0.05 m; and
– Weight: 1 6.6 kg minimum.
f) Semi-solid wall (railing or fence)
– Aluminium or metal material of dimensions shown below in Figure 3.
Additional obstacles shall be considered by the manufacturer as part of their verification and validation activities for functional safety. See 8.4.5, Additional test cases to consider in functional safety verification and validation activities.
测试对象（障碍物类型）
成人躯干
圆柱：直径 200
mm × 长度 600
mm；水平放置；表面反射率 5%-10%（黑色毡布或粗布）
成人小腿
圆柱：直径 70
mm × 高度 400
mm；垂直放置；表面反射率同上
儿童身体
幼儿假人（14.5
kg），站立和坐姿；婴儿假人（9.4 kg），爬行和平躺；表面反射率同上
墙面
木板（如松木）+ 透明亚克力板（透光率 >95%）；尺寸：高 1.5 m × 宽 1 m
桌子
木质或金属腿；高度：0.7–0.8 m；宽度：1.5–2.0 m；深度：0.5–0.8 m；
桌腿厚度：0.03–0.05
m；重量 ≥16.6 kg
半实墙（栏杆或围栏）
产品咨询
